WaterLink Spin Touch Counter Mat
WaterLink Spin Touch FF Manual
WaterLink Spin Touch FF Quick Guide
For available reagent disks, see Disk Descriptions.
SPECIFICATIONS
Instrument Type
Wavelengths
(interference filters)
Display
Wavelength Accuracy
Wavelength Bandwidth
Photometric Range
Photometric Precision
Photometric Accuracy
Sample Chamber
Light Source
Detectors
Pre-Programmed Tests
Languages
Temperature
Operation Humidity Range
Communication
Calibration
Firmware
Software
Power Requirements
Battery Type
Minimum Capacity
Charge Life
Battery Life
Full Charge
Water Resistance
Electrical Rating
Auto Off
Power Save
Data Logger
Centrifugal Fluidics Photometer
390 nm, 428 nm, 470 nm, 525 nm, 568 nm, 635 nm
Color Capacitive Touchscreen, 3.5 in, 320 x 240 pixel resolution
±2 nm
10 typical
-2 to 2 AU
±0.01 AU at 1.0 AU
±0.01 AU at 1.0 AU
Accepts prefilled disk
6 LEDS
6 silicon photodiodes
Yes, with automatic wavelength selection
English, French, Spanish, German, Dutch, Swedish, Portuguese,
Italian, Chinese, Turkish
Operation: 0-50 °C; storage – 40-60 °C
0- 90 % RH, non-condensing
USB-C, Bluetooth low energy technology (BLE)
Factory set, field calibration via internet connection
Internet updateable (New Test, New Test Calibrations, etc.).
Requires a USB connection to Windows PC
WaterLink Solutions (Web, Android, iOS), DataMate Web (Web,
Android, iOS), WaterLink Connect 2 (Windows)
USB wall adapter, USB computer connection or internal lithium ion
rechargeable battery
Lithium ion
12 V/2.6 AH
Approximately 150 tests
Approximately 500 charges
6 hours
Rubber over-molded base, rubber USB Port Plug, gasketed display
and hinge.
Rated voltage 5V
USB C
Yes, default 15 (only with battery power)
Yes, default OFF
250 test results stored for download to PC or transfer by Bluetooth
12
3580-MAT
3587-MN
3587-QG
, Rated power of input current (1.6 A) at