Publicidad
Idiomas disponibles
Idiomas disponibles
automatically or results for an individual sample can be logged after the sample has been tested.
To turn on automatic logging, tap
and
to return to the test screen. When Auto Save is selected
Test Results screen.
To manually log results for one sample at a time, Auto-Save
Tests must be disabled. If Auto-Save Tests is disabled
be highlighted on the Test Results screen. After the test has
been run, tap
to save the results for that water sample to
the Test History.
A user defined identification tag can be assigned to an
individual sample result. To enable tagging, tap
Test Screen. Tap
return to the test screen. The tag can be up to 4 hexadecimal
characters. It cannot begin with a zero. To tag a test result,
on the bottom of the Test Results screen and use
tap
the buttons to enter up to four characters. Tap
character. Tap
to save the tag and return to the Test Results
screen. Tap
to return to the Test Results screen without
saving the tag. The tagged result will appear on the Test Results screen and the Test History
screen. The tag will be preceded by "T-".
Logged results are viewed in Test History. Controls for viewing and managing single or multiple
test records are located on the Test History screen. Tap the checkbox next to a test record to
select it, then tap one of the buttons along the bottom to perform an action with the selected
records.
Print or Send Results to a Bluetooth Phone
or Tablet The WaterLink Spin Touch can print
to the Mobile Bluetooth Printer or send test
results to a Bluetooth-enabled device such as a
phone or a tablet. The highlighted
show which function is active. The Spin Touch
cannot connect to the printer and connect to a
phone or tablet at the same time.
There are two modes of operation for
connecting to the printer and a phone or tablet
– Fast Printer Connect ON and Fast Printer
Connect OFF. The default mode is Fast Printer
Connect ON. Fast Printer Connect can be
turned on or off from the Bluetooth Menu that
is located in the Settings Menu.
If Fast Printer Connect is ON, the meter will connect immediately to the printer upon recognizing
it. It will also connect to a phone or tablet but priority is given to the printer connection. The
printer will start printing immediately when
printer is printing. Fast Printer Connect should be ON if results will be printed more frequently
than results will be sent to a phone or tablet. It can remain selected if results will only be sent to a
phone or tablet. If Fast Print Connect is ON, and the printer is on, the printer will have to be turned
off before results can be sent to a phone or tablet.
If Fast Printer Connect is OFF, the meter has the opportunity to connect to a phone or tablet at all
times other than when the printer is actually printing a test. The meter will connect to the printer
only after
has been tapped so printing will be delayed a few seconds while the connection
to the printer is being established. The
printing, the meter will automatically reconnect to the phone or tablet. Fast Printer Connect
should be OFF if results will be sent to a phone or tablet most frequently and printed less often.
SYRINGE A plastic 3 mL syringe (Code 1189) is used to fill the disks. A precision tip on the
syringe fits into the fill hole on the disk. The syringe tip should not be removed from the
syringe. Syringes should be cleaned between water samples. Pump air in and out of the
syringe a few times to clear the previous sample or rinse the syringe with a small amount of
on the Test Screen. Tap
. Select Enable tags. Tap
or
will
on the
and
to
to erase a
Test History
06:46 16-Apr Fresh FF104
00:22 16-Apr Fresh FF104
will
21:44 16-Apr Fresh FF104
21:43 16-Apr Fresh FF104
20:41 16-Apr Fresh FF104
20:36 16-Apr Fresh FF104
Select All/
View
De-Select All
Selected
Results
is tapped. The
will dim in intensity while the printer is printing. After
7
. Select Auto-Save Tests. Tap
will not be highlighted on the
Test Results
Test Time 07:11:34 16-Apr-2020
ALK 133
AMMO 0.5
G HARD 77
NITRITE 1.1
pH 5.7
NITRATE 23
PHOS 0.6
Save
Print
Tagging
Results
Results
(Not Available)
Delete
History
Home
Selected
Settings
Results
Select
Auto Save
will dim in intensity while the
Transfer
Return
Results
to Test
via
Screen
Bluetooth
Go to Top
Scroll up
or down
the test
list by 5
entries
Go to Bottom
Publicidad
