Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
47
Frost or ice
crystals
on frozen
food
(inside
of
sealed
package).
Condensation
from food with a
high water content
has frozen
inside of the food package
This is normal for food items with a high water
content.
Food has been left in the freezer
Do not store food items with high wafer content
for a long period of time
in the freezer
for a long
period
of time.
Icemaker
is not
Demand exceeds ice storage
The icemaker
will produce
approximately
making
enough
capacity
70-210
cubes in a 24 hour period
ice
House water supply is not
connected,
valve is not turned
on fully, or valve is clogged
Water filter has been
exhausted
Low house wafer supply
pressure
Reverse Osmosis filtration
system is used
Tubing connecting
refrigerator
to house supply valve is kinked
Connect
the refrigerator
to a cold wafer supply
with adequate
pressure
and turn the water
shutoff
valve fully
open.
If the problem
persists, it may be necessary to
contact
a plumber.
It is recommended
that you replace the wafer
filter:
Approximately
every six months.
When
the wafer
filter
indicator
turns
on.
When the water dispenser
output
decreases
When the ice cubes are smaller than normal.
The water pressure must be between
20 and 120
psi (140 and 830
kPa) on models without
a water
filter and between 40 and 120 psi (280 and 830
kPa) on models
with a water filter.
If the problem
persists, it may be necessary
to contact
a plumber
Reverse osmosis filtration
systems can reduce
the wafer pressure
below the minimum
amount
and result
in icemaker
issues
(Refer
to Water
Pressure
section)
The tubing
can kink when the refrigerator
is
moved during
installation
or cleaning
resulting
in reduced
water flow
Straighten
or repair the
water supply line and arrange
it to prevent future
kinks.
Publicidad
