50
TROUBLESHOOTING
Not dispensing
New installation
or water
line
Dispense
2.5 gallons
(9 litters)
of water
(flush
for
water,
recently
connected,
approximately
5 minutes)
to remove
trapped
air
The dispenser
panel
is locked.
The dispenser
is not set for
water
dispensing.
Refrigerator
or freezer
doors are
not closed
properly.
Water filter has been recently
removed or replaced,
Tubing
connecting
refrigerator
to house supply
valve is kinked,
The house water
supply
is not
connected,
the valve is not
turned
on fully, or the valve is
clogged,
and contaminates
from the system.
Do not dispense
the entire
2.5 gallon(9
litters)
amount
continuously.
Depress
and release
the
dispenser
pad for cycles
of 30 seconds
ON and
60 seconds
OFF.
Press and hold the Lock button
for three
seconds
to unlock
the control
panel and dispenser.
The dispenser
can be set for ice or water.
Make
certain
that the control
panel is set for the proper
operation.
Press the Water
button
on the control
panel to dispense
water.
Water
will not dispense
if any of the refrigerator
doors are left open.
After
the water
filter
is replaced,
dispense
2.5
gallons (9 litters) of water
(flush for approximately
5
minutes)
to remove
trapped
air and contaminates
from the system.
Do not dispense
the entire 2.5
gallon (9 litters) amount
continuously.
Depress
anc
release
the dispenser
pad for cycles
of 30 second_
ON and 60 seconds
OFF.
The tubing
can kink when
the refrigerator
is
moved during
installation
or cleaning
resulting
in
reduced
water
flow,
Straighten
or repair the water
supply
line and arrange
it to prevent
future
kinks.
Connect
refrigerator
to the water
supply
and turn
the water
shutoff
valve fully open.
tf the problem
persists,
it may be necessary
to
contact
a plumber.