voestalpine bohler welding URANOS NX 2200 PMC Manual De Instrucciones página 68

SYSTEM PRESENTATION
3. SYSTEM PRESENTATION
3.1 Rear panel
2
EN
3
3.2 Sockets panel
4
1
5
5
4 1
Power supply cable
1
Connects the system to the mains.
Off/On switch
2
Turns on electric power.
It has two positions, "O" off, and "I" on.
3
Not used
4
Signal cable CAN-BUS input (RC, RI...)
5
1
Permits connection of the MIG/MAG torch.
Positive power socket (+)
2
Process MMA:
Process TIG:
MIG/MAG process:
connection
Negative power socket (-)
3
3
Process MMA:
Process TIG:
MIG/MAG process:
External devices (MIG/MAG torch)
4
Welding polarity change
5
2
64
Connection electrode torch
Connection earth cable
Voltage change device
Connection earth cable
Torch connection
Connection earth cable