voestalpine bohler welding URANOS NX 2200 PMC Manual De Instrucciones página 74

EQUIPMENT USE
Welding parameters ( Basic screen)
1
EN
Welding parameters (Graphic screen)
1
Functions
1
MMA welding process
Standard MIG/MAG
Welding methods
Allows the selection of the welding method
3 4
2
3 4
2
4
2 3
Pulsed MIG/MAG
2 Step
when it is released, the gas, the voltage and the wire feed are turned off.
4 Step
Crater filler
Allows welding to be done with three different power levels able to be directly selected and controlled by
speed set by the "initial increment" parameter (during set up) and with the relative synergic values of the
welding parameters.
automatically to the main values set on the control panel.
pre-set (during set up) crater filler parameter values.
stages.
Welding parameters
1
2 Parameter icon
3 Parameter value
4 Unit of measurement of the parameter
Welding parameters
1
Parameter icon
2
3 Parameter value
4 Unit of measurement of the parameter
1 MMA welding process
Welding methods
2
Double Pulsed MIG welding
3
Display type
4
MMA
70
TIG DC