Concept PN3000 Manual Del Usuario página 33

EN
CAUTION
This device is waterproof. It is suitable for
cleaning under running water. Do not use
or clean the device while it is connected to
the power cord.
PRODUCT DESCRIPTION
A Protective head cover sleeve
B Grinding head
C On/off/mode switch button
D Indicator light/display (model PN3020)
E Charging port
F Dust cover
G Charging cable
H Cleaning brush
Note: This device contains a built-in lithium battery
and can only be charged using the cable included in the
package.
64
INSTRUCTIONS FOR USE
It is recommended to clean or soften the skin first and
dry the wet application area before using the product for
best results.
• Check that the grinding head is correctly attached, see
"Removing the grinding head".
• Press and hold the switch for 2 seconds, the default
setting is slow scrolling and the indicator/number "1"
lights up in the display.
• Press the switch once to switch to fast scroll mode, the
red indicator light will illuminate / "2" will appear in
the display.
• Gently rotate (forwards, backwards or right and left)
the dry abrasive head on the rough leather for 2-3
seconds. Do not apply excessive force. If too much
force is applied, the machine will stop. You can also
stop during use to check that the keratin removal is
satisfactory. If the effect is not sufficient, you can
use the machine again on the same area (stay for 2-3
seconds) and check again. Continue until you achieve
a more satisfactory result.
NOTE: If you feel pain or discomfort, do not use the
device.
• After use, switch off the device by pressing and
holding for 3 seconds.
• Rinse the skin or remove any residue with a damp
towel.
• Clean the head according to the cleaning
instructions.
• Place the protective cap over the head.
NOTE: place the "arrow" mark on the cap on top of the
"rectangle" mark on the head of the device, a click will
sound.
EN
65