Publicidad
Idiomas disponibles
Idiomas disponibles
COMPONENT
GENERATING
THE
TYPE OF ALARM
ALARM
"UNIT NAME"
MICROPHONE
CAPSULE ERROR
ME-200B
CAPSULE ERROR
ME-200B
NOT DETECTED
"NAME
OF
THE
SHORT CT ERR.
CONTACT"
"NAME
OF
THE
OPEN CT ERR.
CONTACT"
"PERSONALISED
TEXT TO NOTIFY AN
ALARM"
S ["n"]
NOT DETECTED
(n=
Number
of
slave, id.)
S ["n"]
CONFIGURATION
ERROR
(n=
Number
of
slave, id.)
C ["n":"p" ]
NOT DETECTED
(n= Number of
slave, id.)
If the value is 0,
the unit is a
COMPACT)
(p= lot occupied by
the card)
COMPACT version 5.2.002 ENG
COMPACT
4ETH
DESCRIPTION
Indicates a capsule error of the
microphone desk that is sending the
alarm.
Indicates a capsule error of the
microphone on the ME-200B front
module.
Module ME-200B is not detected.
A short-circuit is detected in the
connection of a contact configured to be
monitored.
An open contact is detected in the
connection of a contact configured to be
monitored.
A contact may be configured so its
activation will generate an alarm on the
screen with the desired text.
The system does not detect a COMPACT-
E unit that appears in the configurations
of the installation.
The system detects a COMPACT-E unit
that
does
not
configurations of the installation.
The unit "n" incorporates a card in slot
"p" that is not detected by the system,
although
it
does
configurations of the installation.
RECOVERY
Check
microphone to the ME-200B module
(metal DIN connector).
If the COMPACT incorporates the ME-
200B module, disconnect the power
supply
connections between the ME-200B
module and the COMPACT.
If the COMPACT does not incorporate an
ME-200B
functionality
configuration.
Check the connection of the contact.
If the contact must not be monitored,
modify the configuration of the contact
via the Call Point software.
Check the connection of the contact.
If the contact must not be monitored,
modify the configuration of the contact
via the Call Point software.
Check the CAN bus connection between
the COMPACT-E unit and the COMPACT.
If the unit is not physically present, check
the configuration of the installation in
the Call Point software to verify that a
COMPACT-E unit has not been added by
error. If so, delete it.
Use the Call Point software to add the
appear
in
the
unit to the installation tree.
or
disconnect the unit from the CAN bus
Check that the card is physically present
and is properly inserted
appear
in
the
or
the card is missing. From the Call Point
software, delete the card from the
installation tree.
R + D Department
Modular audio matrix
with IP connection
the
connection
from
and
check
the
internal
module,
disable
in
the
unit's
25
the
this
web
Publicidad
