Publicidad
Idiomas disponibles
Idiomas disponibles
For a COMPACT protocol operation, following parameters must be fulfilled:
Control
TCP (Unicast)
Unicast Audio (point
UDP (Unicast)
to point)
Multicast audio
UDP (Multicast)
(point to multipoint)
Configuration
UDP (Unicast)
Integration XML
TCP (Unicast)
Integration JSON
TCP (Unicast)
Integration SNMP
UDP (Unicast)
Integration SIP
UDP (Unicast)
ICMP
ICMP (v4)
It is strongly recommended to apply QoS policies (quality of service), both at the network level and at the equipment level,
establishing priorities between the different types of traffic according to the following table:
COMPACT version 5.2.002 ENG
COMPACT
4ETH
Protocol
Multicast address
Between 239.0.0.0 and
239.255.255.255
Priority
Global Audio
HIGH
Local Audio
Integration SIP
TELNET
SSH
Control
MEDIUM
Configuration
Integration XML
Integration JSON
Integration SNMP
FTP
LOW
FTPS
Port
10102,10103,10104
Between 6000 and 32000 Selected by configs.
Between 6000 and 32000
10001
27000
28000
161
162 (TRAPS)
5060 (Control)
7078 (RTP Audio)
Protocol
UDP (Multicast)
UDP (Unicast)
UDP (Unicast)
TCP (Unicast)
TCP (Unicast)
TCP (Unicast)
UDP (Unicast)
TCP (Unicast)
TCP (Unicast)
UDP (Unicast)
TCP (Unicast)
TCP (Unicast)
R + D Department
Modular audio matrix
with IP connection
Others
Prefixed Multicast
addresses (static) for each
global sender. Selected by
configs.
Configurations from PC.
Integration to PC
(optional).
Direct integration and
control to equipment.
Check the communication
of the equipment in the
installation.
29
Publicidad
