Publicidad
Idiomas disponibles
Idiomas disponibles
MODE
When pressed in succession, selects the operating mode indicated on the motor body by the LEDs in the
6. CARE AND MAINTENANCE
The product does not require any maintenance. Use a damp cloth for cleaning. Do not use any aggressive or abrasive cleaning
agents. It is imperative to disconnect the blade from the mains before cleaning. Do not use compressed air to clean the blade,
and in any case never try to help the blade rotate other than normal use of the appliance. Wait until it is completely dry before
reconnecting the appliance to the mains.
7. TROUBLESHOOTING
In the event that the appliance exhibits abnormal operating conditions other than that stated in Chapter 2 above, it is advisable
to consult the following table for simple troubleshooting.
Problem
The fan does not start.
Fan is particularly noisy.
The fan visibly vibrates
If the product shows malfunctions or anomalies other than those indicated, it is highly probable that the problem cannot be solved
independently. In this case, consult qualified technical personnel.
8. TECHNICAL DATA
Power supply voltage:
Power:
Dimensions :
Weight :
Cable length:
9. CONFORMITY OF THE PRODUCT
The producer Melchioni Spa declares that the product Wall fan Mod. MF 2417PA (cod. [118620059) is in compliance with
Directive 2014/30/EU of the European Parliament and of the Council, of 26 february 2014, on the harmonisation of the laws
of the Member States relating to electromagnetic compatibility.
The producer Melchioni Spa declares that the product Wall fan Mod. MF 2417PA (cod. [118620059) is in compliance with
Directive 2014/35/EU of the European Parliament and of the Council, of 26 february 2014, on the harmonisation of the laws
of the Member States relating to the making available on the market of electrical equipment designed for use within certain
voltage limits.
The producer Melchioni Spa declares that the product Wall fan Mod. MF 2417PA (cod. [118620059) is in compliance with
Directive 2009/125/EC of the European Parliament and of the Council, of 21 october 2009, establishing a framework for the
setting of ecodesign requirements for energy-related products.
bottom row (NOR = normal operation, with uniform and continuous rotation, NAT = natural mode,
which simulates natural ventilation by varying the rotation speed, SLP = sleep mode, with rotation
dynamics compatible with sleep).
Possible cause
The electrical plug is disconnected
from the mains.
The electrical socket to which the fan is
connected
electricity.
Parts are not fully assembled.
It has been incorrectly assembled.
The blade is dirty.
220-240V ~ 50Hz
40 W
41.3x45.9x27.6cm
1,753g
179 cm
Probable solution
Plug the electrical plug into a normal 10
Check the efficiency of the socket by
does
not
supply
Review
Review the assembly process, paying
Clean thoroughly, as described in
9
A household socket.
connecting another appliance that
is definitely working. If necessary,
contact an electrician.
the
assembly
tightening screws and bolts more
fully.
closer attention to the order in
which the parts are joined.
chapter 6.
process,
Publicidad
