Publicidad
Idiomas disponibles
Idiomas disponibles
6. Winterised - Recommissioning
6.1.
Preparing for winter
To do so, you need to:
• Cut the power supply to the circuit breaker.
• Close the inlet valve (2) and outlet valve (3) on the Aéromax Piscine.
• Empty the entire Aéromax Piscine water circuit by unscrewing the water inlet
and outlet connectors on the rear of the product, or opening the drainage circuit
valve (if present).
• After making sure that there is no water left in the circuit, screw these
connectors back in, to prevent any foreign bodies from getting into the circuit.
• Place the winterising tarpaulin over the product.
We cannot be held liable for any fault in a product if the winterising rules have not been
complied with.
6.2.
Precautions - Start of season:
When reactivating your pool and Aéromax Piscine, you need to:
Remove the winterising tarpaulin.
Clean the fan to remove any objects that might impede start-up, and clean the
evaporator (rear grille), using a soft-bristled brush, taking care not to bend the
blades.
Check the tightness of the connectors.
Follow the start-up procedure described on page 32 of the manual, and reset
the bypass valves if necessary.
40
Publicidad
