Publicidad
Idiomas disponibles
Idiomas disponibles
Fig. 26 Switching the unit off
l The unit switches off, the display of the air distributor
blanks.
l The display of the remote control shows only the clock.
You can also switch the unit on and off by pushing the touch
button
at the air distributor, see Operating the air distributor
without the remote control for details.
5.7
Setting the temperature
Use the
/
buttons to change the set temperature.
Fig. 27 Setting the temperature
l Both the display of the remote control and the display of
the air distributor show the set temperature.
l The air conditioner confirms receiving each set value
change with a beep.
l You can set the temperature between 16 and 30 °C when
the unit is running.
l You cannot set the temperature in FAN
5.8
Setting the fan speed
Use the FAN
button to set the fan speed level.
l The fan speed level directly influences the air flow volume.
l Each push on the FAN button changes the fan level in the
sequence as shown below.
AUTO indicates that the Automatic FAN mode is selected. In
this mode the fan speed adapts automatically. Automatic FAN
mode is only available in operation mode COOL or HEAT.
Fig. 28 Setting the fan speed
5.9
Setting the turbo mode
Press the TURBO
button to activate the turbo mode. The
turbo mode offers extra powerful cooling or heating perform-
ance. The turbo mode is only available in operation mode COOL
or HEAT.
Fig. 29 Setting the turbo mode
9044618A_OI-II_Cool Top Trail 36V
5.10
Press the MODE button on the remote control to change the
operation mode. The remote control shows the selected icons.
l Each push on the MODE button changes the mode in the
sequence as shown below.
Fig. 30 Setting the operation mode
COOL mode
l In COOL mode the air distributor shows the
the vehicle will be cooled.
l Set temperature and fan speed can be selected manually.
l The compressor switches off when the set temperature is
reached, it automatically switches on again when the room
temperature setting is exceeded.
Fig. 31 COOL mode
DRY mode
l In DRY mode the unit is reducing the humidity inside the
vehicle.
l Set the temperature 1 °C lower than the current room tem-
perature.
mode.
l The air distributor shows the
Fig. 32 DRY mode
FAN mode
l In FAN mode indoor air is circulated through the vehicle
without heating or cooling.
l You can manually set the fan speed.
l The air distributor shows the
room temperature.
Setting the operation mode
symbol.
icon as well as the current
Operating Instructions | 5
symbol and
13 / 154
Publicidad
