Publicidad
Idiomas disponibles
Idiomas disponibles
5 | Operating Instructions
5.16
Resetting the remote control
To reset the remote control to factory settings:
1.
Take out the batteries and then put them back in. See also
chapter 6.2, "Remote control batteries" on page 17.
2.
Set the clock again. See chapter 5.11, "Setting the system
clock" on page 14.
3.
Activate the timer again, if in use. See chapter 5.13, "Activ-
ating the timer" on page 15.
Fig. 43 Resetting the remote control
5.17
Operating the air distributor
without the remote control
You can control the basic functions of the air conditioner by us-
ing the touch button on the display of the air distributor. This is
useful if you cannot immediately find the remote control or if it
has run out of power.
1.
Press the touch button
each press you cycle through the modes: OFF, COOL, FAN,
HEAT.
Fig. 44 Setting the operation mode
– In cooling and heating mode the setpoint temperature is
automatically set to 24 °C and the fan speed is set to
HIGH.
2.
Use the remote control to select any other temperature or
fan speed.
3.
You cannot select AUTO mode at the air distributor, but
the display will show the "auto mode" icon in the top right
corner if this has been selected through the remote control.
Fig. 45 Display on the air distributor
1
Touch button
2
Operation mode symbols
3
Temperature display
16 / 154
at the air distributor display. With
5.18
Adjusting the air outlets
Adjust the direction and angle of the air outlet by moving one
blade around its axis. The two blades move together.
Fig. 46 Adjusting the air outlets
9044618A_OI-II_Cool Top Trail 36V
Publicidad
