Descargar Imprimir esta página

Craftsman 28724 Manual Del Operador página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

Slope Sheet
Keys
(2) Keys
(1) Oil Drain Tube
For Future Use
Your new tractor has been assembled
at the factory with the exception of those parts left
unassembled
for shipping purposes.
When right or left hand is mentioned in this manual, it means, from your point of view, when
you are in the operating position (seated behind the steering wheel).
TO REMOVE
TRACTOR
FROM
CARTON
UNPACK
CARTON
1. Cut along
dashed
lines on all four pan-
els of carton.
Remove
end panels
and
lay side panels
flat.
2.
Remove
protective
materials
from trac-
tor hood and grille.
IMPORTANT:
Check
for and remove
any
staples
in skid that may puncture
tires
where
tractor
is to roll off skid.
ADJUST
SEAT
1. Sit in seat.
2.
Lift up adjustment
lever (A) and slideseat
until a comfortable
position
is reached
which
allows
you to press
clutch/brake
pedal all the way down.
3.
Release
lever to lock seat in position.
CHECK
BATTERY
1.
Lift seat pan to raised
position
and
open
battery
box door.
NOTE:
If this battery
is put into service
after month
and year
indicated
on label
(label located
between
terminals)
charge
battery
for minimum
of one hour at 6-10
amps.
(See "BATTERY"
in Maintenance
section
of this manual
for charging
instruc-
tions).
Seat
Battery box
door
Label
Terminal
NOTE:
You may now roll or drive your tractor
offthe skid. Followthe
appropriate
instruction
below
to remove
the tractor
from the skid.
WARNING:
Before
starting,
read,
un-
derstand
and follow
all instructions
in the
Operation
section
of this manual.
Be sure
tractor
is in a well-ventilated
area.
Be sure
the area in front of tractor
is clear
of other
people
and objects.
7

Publicidad

loading