Parkside PABS 20-Li G8 Traduccion Del Manual De Instrucciones Originale página 25

ried out by the manufacturer or author-
ised customer service centres only.
Safety instructions for all
work
a) Hold the power tool by the in-
sulated handle surfaces when
performing work where the
insert tool or screws may come
into contact with hidden wiring.
Contact with a live wire can also cause
a charge in metal parts of the tool and
result in an electric shock.
b) Do not use any accessories
that are not recommended by
PARKSIDE. This can result in electric
shock­or­fire.
Safety information for using
long drills
a) Do not work at a speed higher
than the maximum permissible
speed for the drill.Higher speeds
can cause the drill to bend slightly
when rotating freely without contact
with the workpiece and can also cause
injury.
b) Always begin drilling at a low
speed and when the drill is in
contact with the workpiece.Hig-
her speeds can cause the drill to bend
slightly when rotating freely without
contact with the workpiece and can
also­cause­injury.
c) Do not apply excessive pressure
to the drill. Only apply pressure
lengthwise along the drill. Drills
can bend and break or cause a loss in
control,­thus­resulting­in­injuries.
RESIDUAL RISKS
Even­if­properly­operating­and­handling­this­
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b)­ Ear­damage­if­working­without­ear­
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic­field­which,­under­certain­
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of­serious­or­lethal­injuries,­we­rec-
ommend that persons with medical
implants consult their doctor and the
manufacturer of their medical im-
plant before operating the machine.
Observe the safety informati-
on and notes on charging and
proper use as shown in the
instruction manual for your
battery and charger from the
(Parkside) X 20 V Team se-
ries. A detailed description of
the charging process and fur-
ther information can be found
in the separate operating inst-
ructions.
Operation
Remove the battery from the
device to prevent accidental
operation. Risk of injury!
GB MT
25