Descargar Imprimir esta página

Craftsman 580.752130 Manual Del Operador página 13

Ocultar thumbs Ver también para 580.752130:

Publicidad

Idiomas disponibles

Idiomas disponibles

How to Stop Yoer Cleaning System
1.
Reieasespray gun trigger and iet engh_eidte for two
minutes.
2.
Move throttie to SLOW position, then STOPposition (A).
3.
ALWAYSpoint spray gun in a safe direction and squeeze
spray gun trigger to releaseretained high water
pressure,
iMPORTANT: Spray gun traps high water pressure, even
when engine is stopped and water is disconnected.
WARNING
The high pressure stream of water that this
equipment produces can cut through skin and its
._
underiying tissues, ieading to serious injury and
)ossibte amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
• Keephigh pressurehoseconnected to purnpand spray' g un
whilesystemis pressurized.
. ALWAYS pointspray' g un in safedirectionand squeeze spray'
gun trigger,to release high pressure,everytime you stop
engine.Engage trigger lockwhennot in use.
4.
Engagetrigger lock on spray gun when not in use.
Hew te Use Spray Tips
The quick-connect on the nozzle extension allows you to
switch between four different quick connect spray tips. Spray
tips can be changed whiie pressure washer is running once
spray gun trigger iock is engaged. The spray tips vary the
spray pattern as shown.
F(_liawthese instructiansto changespray tips:
1= Engagetrigger lock on spray gun=
2.
Puli back coliar on quick-connect and puli current spray
tip off. Store spray tips in holder provided on the nozzle
extension.
WARNING
The high pressure stream of water that this
_
quipment produces can cut through skin and its
underlying tissues, ieading to serious injury and
possible amputation.
° NEVER exchange spraytips withoutlockingthe triggerlock on
the spraygun.
, DONOT twist spraytips whilespraying.
3.
Select desired spraytip:
Lew Pressure
Biack
Useto apply
chemical
40° White
15° Yetiow
0° Red
1750 PSi
2200 PSi
2550 PSi
2.3 GPM
2.2 GPM
2.0 GPM
.
°
For delicate rinse (lower pressure and higher flow),
for gentle cleaning of cars/trucks, boats, RV's, patio
furniture, lawn equipment, etc. select white 40°
spray tip.
,
For general rinsing (medium pressure and medium
flow), ideal for most atI purpose cleaning such as
home siding, brick patios, wood decks, driveways
and sidewaiks, garage floors, etc., select yellow
15° spray tip.
o
For maximum rinsing (higher pressure and lower
flow), for stubborn or hard to reach surface such as
second story surfaces, paint removal, oii stains, rust
removai or other stubborn substances (tar, gum,
grease, wax, etc.), select red 0° spray tip.
,
To apply detergent, appiies project specific cleaners
to help break down stubborn dirt and grime on a
variety of surfaces, select black detergent spray tip.
Puff back on coliar, insert new spraytip and releasecollar.
Tug on spray tip to make sure it is securelyin place.
UsableTips
o For most effective cleaning, keep spray tip from 8 to
24 inches (20 to 61 cm) away from cleaning surface.
,
If you get spray tip too close, especialiy using a high
pressure spray tip, you may damagesurface being
cleaned.
o DO NOT get closer than 6 inches (15 cm) when cleaning
tires.
13

Publicidad

loading