Oase Bitron Premium 60 W Instrucciones De Uso página 43

Bitron AquaMax Eco
Premium
180 W Gravity 10000/
15000/20000
Premium
10000/
12000/16000/2
0000
Titanium 31000 48597,
Titanium 51000 73658, 2×
Expert
21000/26000/
36000/44000
Fitting the UVC clarifier
How to proceed:
1. Open the hose clip of pipe collar DN 110 and push the pipe collar onto the outlet of the UVC
clarifier.
2. Position the UVC clarifier in the container and connect the outlet with the outlet of the con-
tainer using the pipe collar. Tighten the pipe collar.
3. Use fastening brackets to fasten the UVC clarifier on the container.
– The fastening brackets are fastened on the UVC clarifier and on the container wall.
– If they do not already exist, make the required holes in the container wall.
4. Connect the outlet of the pump with the inlet of the UVC clarifier.
– Assembly material: (→ Combinations of UVC clarifier / filter pump)
5. Insert screen baskets and fasten the connection cables with a clip.
6. Attach the switch box on the screws on the outer container wall. (→ Installing the switch box)
– For containers without attachment fixtures, make the required holes and screw in the
screws from the accessories kit as an attachment fixture.
Assembly material
OASE accesso- Hose
ries, art. no.
∅ 50 mm h
73752, 73756,
73758
∅ 50 mm i
73536, 73750,
73752, 73756
–
2× 73750,
73755
–
73750
∅ 50 mm k
73536,
1×/2× 73750,
73752, 73756
Installation diagram, see page 3
Note
Install the pump without filter shells and with
the pump holder EC2 installed
j A lot of force is required for assembly/disas-
sembly.
– Technically possible, combination not recom-
mended, OASE does not offer a sleeve for con-
necting the pump
ProfiClear Premium Individual Module: Either
one screen basket will protrude slightly or re-
move one screen basket or remove the pump
handle
EN
43