Sears Craftsman EZ3 917.259581 Manual Del Propietário página 9

_STALL
MULCHER PLATE (See Figs, 4 and
Jnsta_J two tatch hooks to mulcher plate using screw,
washer, lock washer, and weld nut as shown.
OTE: Pre-assemble wetd nut to latch hook by inserting
eld nut from the top with hook pointing down,
Tighten hardware secureay.
Raise and hold deflector shield in upright position,
Place front of muncher ptate over front of mower deck
opening and slide into place, as shown.
Hook front latch into hole on front of mower deck.
Hook rear latch into hole on back of mower deck
CAUTION: Do not remove discharge
guard from mower. Raise and hold
guard when attaching mumcher plate
and a|low Jt to rest on piate wh#e in
operation.
"O CONVERT TO BAGGING OR
)ISCHARGING
}imply remove muicher plate and store in a safe place,
'our mower is now ready for discharging or installation of
,ptional grass catcher accessory.
_OTE: It is not necessary to change blades. The mulcher
_lades are designed for discharging and bagging also.
F
LATCH _-_
HOOK
WASHER
MULCHER
PLATE
HOOK
LATCH
HOOKS
FIG. 5
9