Using Schedule Alarms: -
are using a schedule: alarms"
is reached,
~ "Schedule alarm —-
tion.
ie time teas
. Time data
BY
4%
as that for the schedule data time.
press SET.
C) 42
* Using the. Schedule Keeper oe
Ifyou attempt to set a schedule alarm time that is already.set for another data
entry, the message "ALARM TIME ALREADY USED?" appears .on the
dlepiey: Press. ESC, yi or oe to aieplay the schedule alarm to dims it.
To set or —
as ecicuuis sists for sin biléting data sinthy
1,
wr
Enter the Schedule Keeper and recall the data for which you want to set or
change a schedule alarm. Press FUNC to display the function menu and then
press 1 to select ITEM EDIT.
. Press NEXT unti! the cursor moves to the Schedule Alarm time.
. Input the schedule alarm time. Use the <] and [> cursor keys to move
'between the hour and minutes setting.
Whenever the schedule alarm setting is shown on the display, pressing DEL
clears the alarm time and displays the prompt "ALM TIME?". Input the alarm
'time using the same procedure described above.
. Aiter inputting the data, press SET to store it into memory.
Note that the schedule alarm setting is cleared from the display when you
press SET.
To view a data entry's current schedule alarm setting
+.
Enter the Schedule Keeper and recail the date whose schedule alarm setting
you want to view.
. Press NEXT to switch the index display to show the schedule alarm settings
for all entries stored under the date you are viewing.
. Use A and ¥ to scroil through the entries and view the alarm times.
- To clear the schedule alarm times, press NEXT again.
To delete a specific schedule alarm
1.
> Wp
Enter the Schedule Keeper and recall the data for which you want to delete
the schedule alarm. Press FUNC to display the function menu and then press
1 to select ITEM EDIT.
. Press NEXT (or V7) until the schedule alarm time appears.
. Press DEL to delete the currently set schedule alarm time.
. After deleting the alarm time, press SET to store the entry into memory.
43 CE)