Steinberg Systems SBS-KW-1000N Manual De Instrucciones página 10

3.1. Device description
On/Off button: Pressing this button switches the unit on and off if there is no load on the scale.
"HOLD/UNIT" button: Pressing this button will "hold" the displayed weight. This allows the weighed items
to be removed from the scale and the weight value will still be visible to the user.
NOTE: Switch on the scale when the display shows
then you can switch the units of measurement between kg, lb and N.
TARE/ZERO" button: If there is a load on the scale, pressing this button will tare the weight of the load.
Note: The tare function eliminates the weight suspended on the scale, such as a container or dish. Thus,
only the weight of the items added to this container / dish will be given.
3.2. Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
10 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded
and correspond to the technical details on the product label.
3.3. Device use
1. Before use, ensure that the area in which the scale will be used provides enough space for the
scale to operate.
EN
1 - Display
2 - On/Off button
3 - "HOLD/UNIT" button
4 - "TARE/ZERO" button
5 - Hook
, immediately press "HOLD/UNIT" and