Publicidad
ENGLISH
®
Fading Out or Fading In at the
Desired Location ............csscccsssssscsesssesssessscesssresesseaees
{Analog output only)
(1)
Fading out and fading in is possible at the desired position during
play
Manual Fader
(Remote control only)
@ Fade Out
When the fader button (FADER) is pressed during play, fade out will be
provided for about 5 seconds. (*°5) will light up during the operation
and
( I»
) will flash. When
fade
out is completed
the player will
automatically pause.
@ Fade In
When the fader button (FADER) is pressed from the pause mode, the
player
will start
playing
and
fade
in will
be provided
for about
3
seconds. FADE will light up during the operation and (CAPE) will flash.
CLEAR
CALL
INDEX
UTO SPACE AUTOEDT
RANDOM
REPEAT
FADER
PEAK
TIME
DISPLAY
(FADER)
(2)
Setting the Fade Out Time in Advance
(TIME FADE)
(Remote control only)
@ When
the fader button (FADER) is pressed in the stop mode, the FADE
indicator (C*°F}) will light up, TIME will appear as --M--S, and the
player
will wait for the input of the fade out time.
@ input the fade out time with the (0~9) number buttons.
@ Pressing the play button ( ® PLAY) will start the playback and the FADE
indicator (CAE)
will light up.
@ The ( I» ) indication will start flashing 5 seconds before the specified
fade out time and then the fade out will begin. The fade out will end at
the specified
time
and
the player will automatically
pause.
The time fade function will be cancelled if an auto search or manual
search
is performed
during playback.
WD)
(Number
buttons)
CLEAR
CALL
INDEX
SME
DISPLAY
(FADER)
14
®
To Search for the Peak Level
OF ENE DISC si 2cco sind insicelecstesinsesatvaadbeeideeddteneantesi
teas toads Peak Search
(Remote control only)
e
The player searches
for the peak portion and
plays a few seconds
either side of this point repeatedly.
This
is convenient
for making
recording adjustments on the tape recorder.
CLEAR
CALL
UTO SPACE AUTOEDT RANDOM REPEAT
FADER
PEAK
TIME
DISPLAY
(PEAK)
@ When the peak search button (PEAK) is pressed in the stop mode, the
PEAK indicator will flash and the player will search for the portion
having
the peak
level.
@ After the search, the PEAK indicator lights up and a few seconds either
side
of the
peak
level
point
are
played
back
repeatedly.
This
is
convenient for making recording adjustments on the tape recorder.
@ To cancel the peak search, press the stop ( Ml STOP) button.
@ When the play button ( » PLAY) or the pause button ( Il PAUSE) is
pressed during peak search or while playing the peak portion back
repeatedly, the player will go to the beginning of the first track (the first
track of the program for program playback, or the track that was first
selected
in the time edit) and
begin
playback
from
here
if the play
button was pressed or enter the pause mode if the pause button was
pressed.
NOTE:
e
The peak search function
reads the level of the disc from the
beginning of the disc to the end at a fixed interval and regards
the maximum
value that was
read
as the peak.
Peak search takes a little time for this reason.
The peak portion
may change each time the disc is read and
there
may
be a slight difference
in the actual
peak level, but
since this difference ever so slight there will be no adverse
affects on the adjustment of the recording
level.
The
time
fade
function
is cancelled
when
the
peak
search
operation is performed. To use the time fade function, set to the
stop mode
then
reset the function.
Buttons other than the open/close button (4 OPEN/CLOSE),
play button ( ® PLAY), pause button ( Hf} PAUSE), and stop (
STOP) button will not function during peak search or repeat play
of the peak
portion.
Publicidad
