Publicidad
ENGLISH
CONNECTION
(1
}
Connections
to the Output
Jacks
(FIXED
and VARIABLE)
Using the included pin cords, connect the left (L) and right (R) output
jacks (FIXED and VARIABLE) on the DCD-S10/3000 to the left (L) and
right (R) CD, AUX,
or TAPE
PLAY
input jacks on an
amplifier.
There are two types of output jacks. The output is variable for the
VARIABLE jacks, and fixed for the FIXED jacks. If you want to be able
to control the output level on the DCD-S10/3000, use the VARIABLE
jacks.
DCD-S10/3000
Power
outlet
=
=
vaet
AEC PLAY
©®
.
© of™
-
a=)
os. 0 ce™.
che
(2)
Connections to the Digital Optical Output Jack (OPTICAL)
(3)
(4)
Use an optical fiber cable to connect the digital optical output jack on
the DCD-S10/3000 to the optical input jack on a digital processor or
D/A
unit.
DCD-S10/3000
Power outlet
Connections to the Digital Output Jack (COAXIAL)
Use
a 75 Q/ohm
pin cord
to connect
the
digital output
jack
(COAXIAL)
of the DCD-S10/3000
to the digital input jack (COAXIAL)
on
a digital processor or D/A unit, available in stores.
DCD-S10/3000
Power
outlet
Digital processor
or D/A
unit
Connections to the Digital! Input Jack (OPTICAL)
Use an optical fiber cable to connect the digital optical input jack on
the DCD-S10/3000 to the optical output jack on a digital processor or
DAT.
DCD-S10/3000
Digital processor
(5)
Connections to the Digital Input Jack (COAXIAL)
Use a 75 Q/ohm pin cord to connect the digital input jack (COAXIAL)
of the DCD-$10/3000 to the digital output jack (COAXIAL) on a digital
processor
or DAT.
DCD-S$10/3000
Power
outlet
(6)
Connections to the Analog Output Jack (BALANCED)
e
Connect as shown on the diagram using a Canon connector (XLR
type) cord,
available
in stores.
e
Canon connector signal layout
1:
Common
2: Cold
3:
Hot
Canon connector signal layout
NOTE:
Do not short-circuit the hot or cold terminal with the common
terminal.
DCD-S10/3000
Power
outlet
i=
Sl
(Amplifier)
Connection
Precautions
e
Ensure that all cables are connected properly to the L (left) and R (right)
jacks.
e
Insert plugs fully into the terminalis.
e
Connect the output jacks to the amplifier CD, AUX or TAPE PLAY input
jacks.
Publicidad
