Publicidad
Idiomas disponibles
Idiomas disponibles
Changing the door hinge
Removing transport protection
The appliance and some of the interior parts are secured for transport.
✓ Remove all adhesive strips on the right and left sides of the appliance door and
the polystyrene parts from the condenser
on the model).
✓ Remove all adhesive tapes and packaging parts from the interior of the appliance.
✓ Remove residues of adhesive with alkaline water.
✓ There may be stickers with warnings on the appliance. These must be observed
and not removed from the appliance.
11 Changing the door hinge
The door hinge of the appliance can be shifted from left to right or vice versa.
APPLIANCE DAMAGE!
Do not tilt the appliance more than 45° when mounting the door in order not to damage
the refrigerating system.
Tools required for changing door hinges:
Tool
Cross-head screwdriver
Flat screwdriver
Step-by-step instructions
1. Unscrew the upper hinge.
2. Lift off the upper appliance door carefully and put it aside.
3. Loosen the middle angle bracket and then unscrew the
middle hinge.
4. Lift off the lower appliance door and place it safely to one
side.
1
condenser = liquefier
Page | 32
1
on the rear of the appliance (depending
Figure
Designation
Publicidad
