Oase PondoVac 5 Puesta En Marcha página 19

Opening/closing the tank
WARNING
Risk of severe injuries or death by electric shock.
 Disconnect the unit from the mains before you start working on it.
How to proceed:
 C
1. Release the locking clips.
– To do this, grip the clips from underneath and pull upwards.
2. Lift off the vacuum head and the adapter ring.
– The vacuum head and adapter ring can be removed separately.
– The plug connector for the discharge pump does not need to be disconnected.
3. Assemble the parts in the reverse order and fasten with the locking clips.
– Ensure that the parts are precisely aligned in relation to each other.
– Ensure that the seal on the adapter ring is correctly seated so that it is not damaged during
assembly.
Assembling the vacuum cleaner
Fitting the wheels
How to proceed:
 D
1. Insert the wheel into the wheel bush.
2. Firmly push the wheel until it locks into place.
Fitting the outlet
Prerequisite: The tank is open. (→ Opening/closing the tank)
How to proceed:
 E
1. Check the correct seating of the adapter with non-return valve.
– Ensure that the adapter is locked into place in the tank wall.
2. Screw the Storz coupling type C onto the outlet and hand-tighten.
EN
19