Publicidad
Idiomas disponibles
Idiomas disponibles
_b
ARNING:
TO AVOID
SERIOUS
INJURY,
BEFORE
PERFORMING
ANY SER-
VICE
OR ADJUSTMENTS:
1.
Depress
clutch/brake
pedal fully and set parking
brake.
2.
Place gearshift
lever in neutral
(N) position.
3.
Place attachment
clutch
in "DISENGAGED"
position.
4.
Turn ignition
key to "STOP" and remove
key.
5.
Make sure the blades
and all moving
parts have completely
stopped.
6.
Disconnect
spark
plug wire from spark
plug and place wire where
it cannot
come in contact
with plug.
TRACTOR
TO REMOVE
MOWER
Mower will be easier
to remove
from the
right side of tractor.
1.
Place
attachment
clutch
in "DISEN-
GAGED"
position.
2.
Move attachment
lift lever forward
to
lower mower
to its lowest
position.
3.
Roll belt off engine
pulley.
4.
Remove
small retainer
spring,
and
remove
clutch
spring
off pulley
bolt.
5.
Remove
large retainer
spring,
slide
collar off and push housing
guide out
of bracket.
6.
Disconnect
anti-sway
bar from chassis
bracket
by removing
retainer
spring.
7.
Disconnect
suspension
arms from rear
deck brackets
by removing
retainer
springs.
8.
Disconnect
front links from deck by
removing
retainer
springs.
Small Retainer S
Flat Washer __
Clutch Spring
Clutch
S
Retainer
Spring
9.
Raise lift lever to raise suspension
arms. Slide mower
out from under trac-
tor.
IMPORTANT:
If an attachment
other than
the mower
deck is to be mounted
on the
tractor,
remove
the front links and hook
the clutch
spring
Into square
hole in frame.
TO INSTALL
MOWER
1.
Raise attachment
lift lever to its highest
position.
2.
Slide mower
under tractor
with deflec-
tor shield to right side of tractor.
3.
Lower lift lever to its lowest
position.
4.
Connect
front links to mower deck and
secure
with retainer
springs.
5.
Connect
suspension
arms to rear
deck brackets
and secure
with retainer
springs.
6.
Connect
anti-sway
bar to chassis
bracket
and secure
with retainer
spring.
Belt Keeper
Suspension
Arms
Engine
-'°"
Pulley
i
uare Hole
Anti-Sway
Bar
Front Link
Retainer Springs
(Both Sides)
Housinc
Guide
Large Retainer
Spring
Brac
21
Deflector Shield
Publicidad
