Publicidad
Idiomas disponibles
Idiomas disponibles
en
WARNING: WE DO NOT REPRESENT AND YOU SHOULD NOT ASSUME THAT THE CHAIN
BRAKE WILL PROTECT YOU IN THE EVENT OF A KICKBACK. DO NOT RELY UPON ANY
OF THE DEVICES BUILT INTO YOUR SAW. YOU SHOULD USE THE SAW PROPERLY AND
CAREFULLY TO AVOID KICKBACK.
Reduced-Kickback Guide Bar and Low-Kickback Chain
Reduced-kickback guide bars and low-kickback saw chains reduce the chance and magnitude of
kickback and are recommended. Your saw has a low kickback chain and bar as original equipment.
Repairs on a chain brake should be made by an authorized servicing dealer. Take your unit to the place of
purchase if purchased from a servicing dealer, or to the nearest authorized service dealer.
WARNING: Computed kickback angle (CKA) listed on your saw and listed in the CKA
table below represents angle of kickback your bar and chain combinations will have when
tested in accordance with ANSI standard. When purchasing replacement bar and chain,
considerations should be given to the lower CKA values. Lower CKA values represent
safer angles to the user, higher values indicate more angle and higher kick energies.
Computed angles represented indicate total energy and angle associated without
activation of the chain brake during kickback. Activated angle represents chain stopping
time relative to activation angle of chain break and resulting kick angle of saw. In all cases
lower CKA values represent a safer operating environment for the user. The following
guide bar and chain combinations meet kickback requirements of ANSI B175.1 when used
on saws listed in this manual. Use of bar and chain combinations other than those listed
is not recommended and may not meet the CKA requirements per standard.
WARNING: Do not mount a bow guide on any Efco chainsaw. The risk of kickback is
increased with a bow guide because of the increased kickback contact area.
Recommended bar and chain combination
Model
Bar Length
MT 6500
MT 6500
MT 6500
MT 6500
12
SAFETY RULES
Oregon
Chain Pitch Drive Link Count
Bar P/N
16"
160RNDD009
18"
180RNDD009
20"
200RNDD009
24"
240RNDD009
3/8" x .058"
60
3/8" x .058"
68
3/8" x .058"
72
3/8" x .058"
84
CKA
Oregon
without Chain
Chain P/N
Brake
72 LPX 060X
72 LPX 068X
MAX 45°
72 LPX 072X
72 LPX 084X
Publicidad
