Descargar Imprimir esta página

Blackstone ADVENTURE Ready 6960 Manual Del Propietário página 6

Horno de pizza portátil kit de conversión

Publicidad

Idiomas disponibles

Idiomas disponibles

accidental injury.
Some parts may contain
sharp edges, especially as
Owner's Manual |
.
noted in these instructions.
Wear protective gloves if
necessary.
!
WA R N I N G
!
C A U T I O N
e
The manufacturer has made
Two people are recom-
y
every effort to eliminate any
mended for the assembly of
sharp edges. However, you
this product.
should handle all compo-
nents with care to avoid
accidental injury.
Some parts may contain
sharp edges, especially as
noted in these instructions.
Wear protective gloves if
necessary.
!
WA R N I N G
This appliance will be hot
of
during and after use. While
cooking, place unit on
heat-resistant and flame-re-
sistant surfaces to avoid
damage and injury.
!
C A U T I O N
Two people are recom-
mended for the assembly of
this product.
!
WA R N I N G
This appliance will be hot
of
during and after use. While
cooking, place unit on
heat-resistant and flame-re-
sistant surfaces to avoid
damage and injury.
04
accidental injury.
Some parts may contain
sharp edges, especially as
Assembly Guide
noted in these instructions.
Wear protective gloves if
necessary.
This appliance will be hot
during and after use. While
ASSEMBLY INSTRUCTIONS
cooking, place unit on
Please read all instructions thoroughly before proceeding. Make sure all
heat-resistant and flame-re-
the plastic packing material is removed before assembling.
sistant surfaces to avoid
damage and injury.
Find a large, clean area to assemble your unit. Please refer to the parts list and
assembly diagrams as necessary.
S T E P 0 1
Remove the four (4) M8 flange nuts from the four (4) oven feet.
Use the four (4) M8 flange nuts to attach the heat shield and four (4) oven feet
to the bottom of the griddle body.
This appliance will be hot
during and after use. While
cooking, place unit on
heat-resistant and flame-re-
sistant surfaces to avoid
damage and injury.
S T E P 0 2
from its packaging and place it on a
smooth flat surface.
S T E P 0 3
tapping screws from the upper
brackets.
Use the four (4) tapping screws
to attach the vent cover to the
upper brackets.
!
WA R N I N G
Place the griddle body (not included) on its back.
!
WA R N I N G
Remove the oven body
Remove the four (4)
Model 6960
• Do
ba
• Do
da
re
et
• Do
ba
• Do
da
re
et

Publicidad

loading