Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
Longest life and best performance can be obtained if the battery pack is charged when the
surrounding air temperature is between 65°F (18°C) and 75°F (24°C). DO NOT charge battery pack
in an air temperature below 40°F (4.5°C), or above 105°F (40.5°C). This is important and will prevent
serious damage to battery pack.
The charger was designed to fast charge battery pack between 32°F (0°C) and 113°F (45°C). If the
battery pack just inserted is too cold or too hot, the charger will not charge it and only the green LED
indicator and the red LED indicator will blink alternatively and continuously. After the battery pack
temperature fit standard temperature range, the fast charging procedure will be started automatically.
If battery pack is not charged properly: check battery pack terminals for dirt. Clean with cotton
swab and alcohol if necessary.
If battery pack is not still charged properly, take or send charger (and battery pack) to the closest
certified Service Center.
Under certain conditions, with the charger plugged into the power source, the exposed charging
contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive
nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be
kept away from charger cavities. Always unplug the charger from the power source when there is no
battery pack in the battery compartment. Unplug charger before attempting to clean.
Do not freeze or immerse charger in water or any other liquid.
WARNING
Don't allow any liquid to get inside charger. Electric shock may result. To facilitate the cooling of the
battery pack after use, avoid placing the charger in a warm environment such as in a metal shed, or an
uninsulated trailer.
CAUTION
Never attempt to open the charger for any reason. If the plastic housing of the charger breaks or cracks,
return to the closest certified Service Center.
NOTE
This product is not user serviceable. There are no user serviceable parts inside the charger. Servicing at
the closest certified Service Center is required to avoid damage to static sensitive internal components.
READ ALL OF THE INSTRUCTIONS IN THE BATTERY CHARGER SECTION OF THIS MANUAL
BEFORE ATTEMPT TO CHARGE THE BATTERY PACK FOR YOUR TOOL.
Always use correct battery pack (pack supplied with tool or replacement pack exactly like it.) Never
install any other battery pack. It will ruin your tool and may create a hazardous condition.
CAUTION
A Lithium-ion battery pack can remain in the charger without damaging the battery or the charger.
The battery will remain fully charged in the charger.
1English1
IMPORTANT CHARGING NOTES
IMPORTANT BATTERY PACK NOTES
English
-7
Publicidad
