Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Read instruction manual
Wear hand protection
Caution!
WARNING: Moving parts can cause crush and cut injuries
Indoors use only!
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
GB
4
Original Instructions
Specification
Model No:
Voltage:
Power:
No load speed:
Planing width:
Planing depth:
Insulation class:
Dimensions (L x W x H):
Weight:
Sound and vibration information:
Sound pressure L
Sound power L
Uncertainty K:
Typical weighted vibration a
Uncertainty K:
As part of our ongoing product development, specifications of Triton
products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately and check the ear
protection is correctly fitted and provides the correct level of sound attenuation
for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to
a chronic condition. If necessary, limit the length of time exposed to vibration
and use anti-vibration gloves. Do not operate the tool with hands below a
normal comfortable temperature, as vibration will have a greater effect. Use
the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use
for the tool in normal working conditions. A poorly maintained, incorrectly
assembled, or misused tool, may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound and vibration
levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
TCMPL
220-240V~ 50Hz
420W
13,000rpm
60mm
0-1.5mm
310 x 130 x 111mm
2.4kg
:
87dB(A)
PA
:
99dB(A)
WA
3dB
:
7.47m/s
h
1.5m/s
2
2
Publicidad
