Kenmore 911.47862 Guía Para El Uso Y Cuidado página 30

CAREAND CLEANING
Removable Parts
Disconnect electr,cal power
l_'_jf) to the oven at the main
circuit breaker or fuse box
before attempting to replace the
oven light bulb. Do not touch a
hot light bulb with wet hands or a
wet cloth• Wait until the bulb is
_ooled and use a dry cloth.
Live Socket
Bulb Collar
TO REMOVE THE COVER
1. Disconnect electrical power to the
oven at the main circuit breaker or
fuse box.
2. Hold your hand under cover and
firmly twist cover.
REPLACE THE LIGHT BULB
Unscrew the light bulb and replace it
with a 40-watt appliance bulb.
TO REPLACE COVER
1, Place the bulb cover into the
groove of the bulb socket,
2. Reconnect the electrical power to
the oven.
TO REMOVE _
Open the door to the
broil stop position. 7 • '.-
Grasp the door on
each side and lift up
IJ _'_
and off the hinges. DO
NOT LIFT THE DOOR I_
BY THE HANDLE.
When the door is removed *
and the hinge arms are in
the broil stop position, do
not bump into the hinge arms.
They could snap back and cause
injury to hands and damage the
porcelain finish of the front
frame. Cover the hinge arms with
empty paper towel rolls or towels
while working in the oven area. ,
TO REPLACE
Remove the paper towel
rolls or towels. Make
sure the hinges are still
in the broil stop position. J,A,,
Grasp the door on each
side. Lift the door over
each hinge, Line the slots at the
bottom of the door with the hinges.
Slide the door down over the hinges
as far as it will go.
TO REMOVE Bumpin
1. Pull the
Rack GuideJ_ !_
racks RaisedBack __ J_
out to of
the
Rack_._
the stop lock position._
2. Pull up the front of the rack and
slide under the bump of the rack
guide.
TO REPLACE
1. Place the raised back of the rack
onto the rack guides.
2. Lift the front of the rack until the
raised back slides under the bump
of the rack guides.
3. Slide the rack all the way back.
3O