Ideal 61-744 Manual De Instrucciones página 9

Battery Replacement:
• Ensure test leads are disconnected from
circuit or components.
• Remove test leads from input jacks
on meter.
• Remove the two screws from the
battery cap.
• Remove the battery cap.
• Replace batteries with two
"AAA" batteries.
• Assemble the battery cap
to the meter and re-tighten
the screws.
Maintenance:
Switch off and disconnect the meter completely before carrying out any maintenance.
Clean the case with a damp cloth and mild detergent. Do not use abrasives or solvents.
Keep away from liquids and ensure the meter is completely dry before use.
Service and Replacement Parts:
This unit has no user-serviceable parts.
For replacement parts or to inquire about service information contact IDEAL
INDUSTRIES, INC. at 1-877-201-9005 or visit our website www.idealindustries.com.
Specifications:
Display:
Polarity:
Overrange:
Measure Rate:
Auto Power Off:
Battery Life:
3-3/4 digit LCD with 4000 counts
Automatic, positive implied, negative (-) polarity indication.
"OL" indication is displayed.
Samples 2 times per second, nominal.
Approximately after 10 minutes of non-use.
400 hours continuous with Alkaline (61-744)
250 hours continuous with Alkaline (61-746)
Page 9