Publicidad
Idiomas disponibles
Idiomas disponibles
After you pJug in the unit it will perbrm a senttest. All the display Jights
will turn on for 3 seconds The LEDdisplay will read "88". If any dispnay
Jight fails to turn on you may need service on the unit. After the 3 seconds
seJftest the unit winJautomatically go to the stand by mode. Now aUJ J ights
will be off and you wiJnhave to turn "ON" by pressing the On/Off
key
After pressing "On/Oft/',
the unit starts to work and enters the status of
"Fan OnJy" with low setting.
You wiJnhave to press the (,_) or (_) key on the TempiTime to set the
temperature at your desired comfort. You can choose between
61 °F and 86°F. Once the temperature is set you can raise or Jower it
by pressing the (,_) or (T) keys (Only when the unit is cooJing,
can the temperature setting be adjusted.) (See Fig. # 2)
Fig. # 2
¢ontroU PameU.
ff you want to cool the room press the COOL function. If you just need
to use the fan onJy, press the Fan function. (See Fig.# 3)
Publicidad
