Publicidad
Idiomas disponibles
Idiomas disponibles
For cool days you may want to run the " Fan Only " funcfion_ Here the fan
can runs at HGH, MED or LOW. ( See Fig. #5 )
Fig. # 5
Control Panel
@
@
@
low
rned
high
Timeron or Timer off mode is used to pre_startor shut off your unit in
advance. You can program this up to 24 hours in advance. Youcan use
the Timer in 2 functions ke Cod or Fan Only.
_Timer On. (See Fig. # 6)
Unit mustbe on to set the timer: Unit wiUJ shut down automaticdJy after it
acceptsthe settingsin 5 seconds. Usethis mode to presserthe start time of
the unit 24 hours in advance.
a) PressOn, LEDdlsplay wiJU show "XX" (time set Uast t ime) when power
is connectedfirst time, LEDdispJaywilJ show "01" .
b) Set desired number of hours by pressingthe (A) pad of the Temp/Time
buttons, one for each houn If you passedthe desired time use the (_r)pad
key to lower the seJection.
c} After set Timer On, LED display will show the time° This time
displayed: unit will starts after X hours.
11
Publicidad
