Publicidad
Idiomas disponibles
Idiomas disponibles
56
•
Remove all keys or hand tools from the work area before starting this machine. Make sure there are no electrical
cords, gas or water lines, etc., or other hidden or invisible hazards in the work area.
•
Remember that the machine operator is responsible for hazards and accidents caused to other people or things.
The manufacturer is in no way liable for damage caused by improper or incorrect use of this machine.
FUEL SAFETY
•
Gasoline and oil are dangerous. Do not inhale or ingest. If you swallow fuel and/or oil, seek medical advice
promptly. If it comes into contact with fuel or oil, clean with plenty of soap and water as soon as possible. If
irritated eyes or skin occur afterward, consult a doctor immediately.
•
Fuel and oil are dangerous and highly flammable chemicals. If they become inflamed, extinguish the fire with a
dry powder extinguisher.
•
Do not spill fuel or smoke near the machine.
•
Always turn off the engine before refuelling.
•
Always refuel in well-ventilated areas. And never with the engine running, or hot.
•
If a fuel leak is found, do not start or run the engine until the leak has been repaired.
•
Make sure the fuel cap is properly closed.
•
Fuel stored in the carburetor for long periods of time can cause a hard start and may also lead to further repairs
and maintenance.
•
Always store fuel in approved containers.
MAINTENANCE, TRANSPORTATION AND STORAGE SAFETY
•
Inspect the equipment before each use for any misalignment, jamming, loose components, damage, or other
conditions that may affect its operation.
•
Do not modify machine controls or engine speed settings.
•
Do not force this machine. Proper use for the type of work to be done will allow you to work better and safer.
•
Perform maintenance on the machine. Keep the handles of this machine dry and clean.
•
Turn off the machine and disconnect the spark plug before making any adjustments, filling with fuel, changing
accessories, cleaning, transporting or storing this machine.
•
To avoid burns or fire hazards, allow the equipment to cool completely before transporting or storing. Never place
the equipment in places where flammable materials, flammable gases or flammable liquids, etc. are present.
•
The equipment is not weatherproof, and should not be stored in direct sunlight, high ambient temperatures, or in
damp or wet locations.
•
If the machine starts to vibrate strangely, turn it off and examine it for the cause. If you do not see the reason, take
your machine to the Official Technical Service.
•
Store inactive tools out of the reach of children.
SERVICE
•
Have the product checked regularly by a qualified technician and use only original replacement parts. If you have
any questions, please contact the Official Technical Service.
Publicidad
