Publicidad
Idiomas disponibles
Idiomas disponibles
Keepcuttingtoolssharpandclean.Properly m aintained cutting toolswith
sharp cutting edges arelesslikely to bindandareeasier to control.
Usethe
power tool, accessories
and tool bits etc., in accordance
with
these
instructions,
taking
into account
the working conditions
and the
work to be performed.
Use of the power tool for operations
different from
those intended could result in a hazardous
situation.
SERVICE
Have your power tool serviced
by a qualified
repair
person using only
identical
replacement
parts. This will ensure that the safety of the power
tool is maintained.
Follow
instructions
in the Maintenance
section
of this manual.
Use of
unauthorized
parts or failure to follow Maintenance
instructions
may create
a risk of shock or injury.
SPECiFiC
SAFETY RULES FOR BELT SANDER
*
Hold sanders
by insulated
gripping
surfaces,
because
the belt may
contact
its own cord. Cutting a "live" wire may make exposed
metal parts
of the power tool "live" and could give the operator an electric shock.
*
A suitable
breathing
respirator
must be worn while sanding
lead paint,
some woods and metal to avoid breathing
the harmful/toxic
dust or air.
*
Always
wear safety
goggles
and a dust mask
when sanding,
especially
sanding
over-head.
*
The machine
is not suitable
for wet sanding.
*
Secure
the workpiece.
A workpiece
clamped
with clamping
devices or in a
vice is held more secure than by hand.
*
Make sure the belt is not contacting
the workpiece
before
the on/off
trigger
switch
is turned
on.
*
Do not leave the tool running.
Operate the tool only when hand-held.
Publicidad
