Publicidad
Idiomas disponibles
Idiomas disponibles
8
press button (16) to block it. To deactivate function
press button again (15).
SteamSprayfunction
(mod.410)
The exclusive patented STEAM SPRAY system
represents the latest and biggest innovation in the
world of ironing systems. Apart from the large
amount of steam coming from the soleplate, it is also
possible to have a powerful steam burst that comes
from the front of the iron. This steam burst is more
intense than the drier steam coming from the
soleplate and gives excellent results especially when
ironing more difficult fabrics; it is ideai for eliminating
false creases and wrinkles. Using STEAM SPRAY is
recommended for pronounced edges and near
buttons and zips.
Activating Steam Spray is very simple: when ironing,
press button (15) to release steam from soleplate;
pressing fully releases steam from the nozzle at the
front ofthe iron.
Vertical ironing
This system is useful for reviving fabrics eliminating
creases just using steam:
·Set the temperature control dial to the maximum
three points.
• Hang the garment up and keep the fabric taut with
one hand.
• Hold the iron vertically nearthe fabric.
• Press the steam button moving the iron from top to
bottom.
GODO IRONING HINTS
• Do not iron on solid surfaces, e.g. kitchen table,
because under these conditions the steam cannot
escape, condensation forms between the surface
and the cloth, dampening it excessively.
• Separate the garments according to the
temperatures written on the care label and start by
ironing those that require the lowest temperatures:
the iron takes less time to heat than to cool. If the
fabric is mixed (e.g. 30% cotton and 70%
synthetic) set the iron to the temperature of the
fabric that needs the lowest temperature. To
establish the temperature of a fabric whose
composition is unknown, this should be tested on
a hidden area starting from the lowest temperature
and increasing slowly.
• Do not iron stained areas: the heat of the soleplate
fixes the stains onto the fabric making them
permanent.
AFTERUSE
Wrap the flexible cord around the appliance body.
Wait until appliance is co Id before putting away or
cleaning.
CLEANING ANO SERVICING
• Do not add any detergent, perfume or descaling
product if not expressly recommended by the
manufacturer.
• Regular cleaning of the tank is recommended,
proceeding as follows:
• Make sure the appliance is disconnected from the
power supply and is completely cold.
• Unscrew the tank fili cap (2) and turn the
appliance upside down to empty the residual
water into the sink.
• Fili the tankwith about 0,51 of water and screwthe
cap (2) backon.
• Shake slowly, reopen the cap and empty the
water again into the sink.
• Repeat operation 2-3 times to allow scale to be
removed in the water.
• Keep the soleplate clean by wiping it, when cold,
with a damp, slightly rough cloth .
• Use a damp cloth to clean the appliance exterior,
avoid use of detergent that can stick to plastic
surfaces.
Publicidad
