Parkside PKGA 20-Li C2 Traduccion Del Manual De Instrucciones Originale página 28

GB MT
Introduction
Congratulations­on­the­purchase­of­your­
new device. With it, you have chosen a
high­quality­product.­During­production,­
this­equipment­has­been­checked­for­
quality­and­subjected­to­a­final­inspection.­
The­functionality­of­your­equipment­is­
therefore guaranteed.
The­operating­instructions­constitute­
part­of­this­product.­They­contain­
important­information­on­safety,­use­
and­disposal.
Before­using­the­product,­familiarise­
yourself­with­all­of­the­operating­and­
safety­instructions.­Use­the­product­only­
as­described­and­for­the­applications­
specified.­Keep­this­manual­safely­and­in­
the­event­that­the­product­is­passed­on,­
hand­over­all­documents­to­the­third­party.
Intended Use
The device is intended for tightening and
releasing screws and for drilling holes in
wood,­metal­or­plastic.­
The device is not suitable for commercial
use.­Any­other­use­that­is­not­explicitly­
approved­in­these­instructions­may­result­in­
damage­to­the­equipment­and­represent­a­
serious danger to the user.
The­equipment­is­designed­for­use­by­
adults. Adolescents over the age of 16
may­use­the­device­only­under­supervision.
The manufacturer is not liable for damages
caused­by­unspecified­use­or­incorrect­
operation.­Commercial­use­will­invalidate­
the guarantee.
The­device­is­part­of­the­Parkside­
X 20 V TEAM­series­and­can­be­operated­
using­Parkside­X 20 V TEAM­series­
batteries.
28
The batteries may only be charged using
chargers­from­the­Parkside­X 20 V TEAM­
series.
General­Description
­ The­illustration­of­the­principal­
functioning­parts­can­be­found­
on­the­front­and­back­foldout­
pages.
Scope­of­delivery
Carefully­unpack­the­trimmer­and­check­
that­it­is­complete.­Dispose­of­the­packag-
ing material correctly.
•­ Motor­unit­with­drill­attachment
• Sabre saw attachment
•­ Multifunction­tool
• Accessories for drill attachment
-­ 6­drill­bits­(1,5/2/3/4/5/6­mm)
-­ 6­screwdriver­bits,­50­mm
-­ Bit­holder
• Accessories for sabre saw attachment
-­ Wood­sawblade­(HCS150/6TPI)
-­ Metal­sawblade­(BIM­150­/18­TPI)
• Accessories for multifunction tool
-­ Plunge­sawblade
-­ Scraper­blade
-­ Delta­sanding­plate­with­3­sanding­
sheets­(1­x­P*­60,­1­x­P­80,­1­x­P­120)
• Storage case
•­ Instruction­Manual
Battery and charger are not
included.
*P = Grain size