Publicidad
Idiomas disponibles
Idiomas disponibles
_
R,,e_N
C_
MODEL
B5936SS
Page
5
INSTALL THE HOOD
(Non-Ducted
Installation
Only)
_J
NON=DUCT OPTION AVAILABLE
ONLY IN THE U. S.
jJ
(8) M4 x 10mm
PAN HEAD
MACHINE
SCREWS
J_
J_
POWER
7. Attach the hood assembly to the ceiling bracket using (8)
M4 x 10mm machine screws (2 for each support leg).
8. Connect metal duct to ceiling duct and seal with duct tape.
9. Connect power cable to house wiring inside of electrical
outlet box. Black to Black, White to White, and Green to
Green or Bare wires. Secure power cable to wiring box with
appropriate
connector and re-attach outlet box cover.
RECIRCULATION
FILTER
NON-DUCT
8 MOUNTING
PLENUM
SCREWS
_
(M4 x 8
Pan Head
Sheet Metal)
NON-DUCT
COLLAR PLENUM
Q 2
TIE__
WRAPS
"%
FLEXIBLE DUCT
NOTE:
Non-ducted
installations
require Non-Duct kit; model RK59
(purchased separately).
Do not use plastic or rigid metal duct.
DAMPER
FLAPS
J_
J
J
_J
(4) M4 x 8mm
SHEET METAL
SCREWS
jj_
10. Slide the inner flue up to the ceiling and secure with (4) M4
x 8mm sheet metal screws.
1. Remove the damper flaps from the damper / duct connector
and discard flaps.
(4) M4 x 8mm
SHEET METAL
SCREWS
&
&
2. Attach non-duct collar to non-duct plenum using (4) M4 x
11. Remove the protective coating from the hood and the
outer flue.
8mm sheet metal screws.
Publicidad
