Publicidad
Idiomas disponibles
Idiomas disponibles
•
Place the jar assembly on the motor house and turn it clockwise to lock
and release the safety switch, makes sure the arrows are aligned.
•
Connect the mixer to the power supply. The display will light up and beep.
•
Turn the Speed control button to the desired and recommended speed
setting, time and capacity shown in the table above.
•
The timer will count up in 1 second intervals. The speed can be
changed at any time while the mixer is operating.
FOOD PROCESSOR
Safety
•
Keep hands and utensils out of the bowl whilst the mixer is connected
to the power supply.
•
Never use your fingers to push food down the feed tube. Always use
the pusher/s supplied.
•
Don't blend liquid ingredients as they may leak from around the cover.
•
Never use a damaged attachment. Get it checked or repaired.
•
Capability of food processor bowl: Meat MAX 300g.
Installing the mixer bowl
•
Place the appliance on a flat surface, e.g. a kitchen counter, and make
sure it is standing firmly.
•
Remove the protective cover for the blender.
•
Ensure that the protective cover for meat grinder is fitted in place.
•
Remove the cover from the food processor bowl by rotates it anti-
clockwise.
•
Place the food processor bowl onto the food processor connector
ensuring that the arrow in the bowl is aligned with the arrow on the
connector, hold the bowl and turn the connector clockwise until it
locks into position.
•
Place the food processor assembly on the motor house, so the arrow
is aligned with the circle. Turn it clockwise, so the arrow is aligned with
the arrow.
Cutting plate
Note: 1 min ON + 2 min. OFF in a cycle, continuing to work 5 cycles, stop 40 min.
Note: Capability of food processor bowl: Max 350g
•
Place the desired cutting plate onto the connector driver. The preferred
cutting side must face upwards. Handle the cutting plates with care,
they are extremely sharp. Hold the plates by the center grip.
EN
11
Publicidad
