Instruction manual
•
Fit the cover onto the bowl, so that the arrow is aligned with the circle.
Turn it clockwise, so the arrow is aligned with the arrow.
•
Connect the mixer to the power supply. The display will light up and beep.
•
Turn the Speed control button to the desired and recommended speed
setting, time and capacity shown in the table above.
S-blade assembly
Note: 20 sec ON + 2 min. OFF in a cycle, continuing to work 5 cycles, stop
40 min.
Note: Capability of food processor bowl: Meat MAX 300g.
•
Place the S-blade onto the connector driver. Handle the S-blade with
care, it's extremely sharp. Hold the plates by the center grip.
•
Cut the food in small pieces and place it into the bowl ensuring it is
evenly distributed.
•
Fit the cover onto the bowl, so that the arrow is aligned with the circle.
Turn it clockwise, so the arrow is aligned with the arrow.
•
Connect the mixer to the power supply. The display will light up and
beep.
•
Turn the speed control button to the desired and recommended speed
setting, time and capacity shown in the table above.
12
Citrus juicer
Note: 2 .5min. ON + 2 min. OFF in a cycle, continuing to work 5 cycles, stop 40
min.
Note: Capability of food processor bowl 550ml.
•
Place the sieve in the bowl. So the arrow in the bowl is aligned with the
arrow on the sieve.
•
Place the citrus juicer connector onto the sieve.
•
Fit the squeezer.