Descargar Imprimir esta página

WerkaPro GZGP600-J Manual De Instrucciones Y Uso página 19

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
Do not work with a damaged or incomplete device or with a device that has
been modified without the consent of the device manufacturer. Before
commissioning, have a specialist check that the required electrical protective
measures are available.
Do not carry or attach the appliance by the cable or the pressure hose.
Protect the unit from frost and dry running.
Only use original accessories and do not modify the appliance.
With regard to the topic "Maintenance and cleaning", please read the
instructions in the operating manual. All tasks related to this topic, in
particular opening the device, must be carried out by a qualified electrician.
In the event of repairs, always contact our service department.
Electrical safety:
Caution : This will prevent injuries and accidents due to electric shock:
When the appliance is in operation after being set up, the mains plug
must be accessible.
Before you start up your new pump, have a professional check:
-
that the earthing, the neutral connection, the fault current protection
circuit correspond to the safety standards of the energy supply companies
and function correctly,
-
that the electrical connections are protected against moisture,
-
that in case of flooding the connections are located in a flood-proof
area.Faites attention à ce que la tension de réseau corresponde aux
indications de la plaque signalétique.
Make sure that the mains voltage corresponds to the information on the
rating plate.
The connection to the mains supply must be carried out by an experienced
electrician
Only connect the appliance to a socket outlet with a fault current protection
device (FI switch) with a maximum reference current of 30 mA; protection
of at least 10 amps
Before use, check the device, cable and plug for damage. Defective cables
cannot be repaired but must be replaced with new ones. Have your appliance
repaired by a professional.
If the power cable is damaged, it must be replaced by the manufacturer, its
service department or similarly qualified persons to avoid danger.
Do not use the cable to pull the plug. Protect the cable from heat, oil and
sharp edges.
17

Publicidad

loading

Este manual también es adecuado para:

Gzgp1000-jGzgp1200-j146531465414655