Publicidad
Idiomas disponibles
Idiomas disponibles
FUNCTIONING
CALL FOR NAME SELECTION
In normal functioning, the repertory displays the
message inviting the user to select the name to be
called:
Select NAME
with ↑ or ↓
Using the two scroll keys (6) it is possible to select
the name to be called. At this point, simply press the
Call key to send a call to the name selected. The
following message is displayed:
NOTE: if the user simply presses the Call key
when invited to select the name, a call
will be forwarded to the main entrance
switchboard.
Three confirmation beeps are emitted to indicate
forwarding of the call.
The buzzer of the indoor set called is activated for
the time programmed (from 1 to 5 seconds) with a
continuous tone (Main Call Module) or intermittent
tone (Secondary Call Module).
The name selected is then redisplayed and remains
visible for approximately 30 seconds during which
the buzzer of the indoor set can be activated again
simply pressing the Call key again.
When the indoor set replies, the following prompt is
displayed:
During the conversation, any lock release command
will be highlighted both audibly (3 beeps) and visibly
with the following caption for 3 seconds:
At the end of the conversation, (or if no reply is recei-
ved after approx. 30 seconds), the name selection
message is redisplayed automatically accompanied
by.3.beeps.
DS1038-030
CALL
MADE
PLEASE
SPEAK
DOOR
OPEN
CODE FOR CALL COMPOSITION
The code entered on the keyboard of the Call
Module is shown on the display.
Pressing of each key is echoed by an audible
signal:
CALL TO:
When the 'Call'' key is pressed, the call is forwarded to
the extension with the code entered. The buzzer of the
indoor set called is activated for the time programmed
(from 1 to 5 seconds) with a continuous tone (Main
Call Module) or intermittent tone (Secondary Call
Module ). Three beeps confirm that the call has
been forwarded. Subsequent pressing of the Call key
extends the buzzer activation time.
When the 'X' cancellation key is pressed (in the
case of an error during entry of the code), the
number on the display is cleared.
During the call, any lock release command will be
indicated both audibly (3 beeps) and visibly with the
following caption for 3 seconds:
At the end of the conversation (or if no reply
is received after approx. 30 seconds) the name
selection message is redisplayed automatically
accompanied by 3 beeps.
DIRECT CALLS
Two particular users can be called pressing the
matching keys of the 1148/12 Module if present. Any
1038/40 Main Entrance Switchboard can be called
simply pressing the 'Call' key (without entering any
code and without selecting a name) or alternatively
one of the two 1148/12 Module keys (if present and
suitably programmed).
ADDITIONAL CODES AND FUNCTIONS
The Call Module with Repertory is able to manage
three separate groups of codes:
• call codes (1-9999)
Identify the house phone or video house phone
indoor set called; during entry, codes consisting
of less than four digits/letters must NEVER be
preceded by zeroes (for example, enter "12"
and not "012"). The call codes must always be
terminated pressing the 'Call' key which activates
forwarding of the code.
23
DOOR
OPEN
3
Publicidad
