Publicidad
Idiomas disponibles
Idiomas disponibles
MANAGEMENT USING THE 1038/56 TERMINAL
After establishing a logical connection with
the Call Module concerned (see description in
PROGRAMMING WITH THE 1038/56' TERMINAL),
move to the page:
<Names>
<Lock release>
<Program>
<Cancel><Exit>
Select <Names> and press ↵. The name
Management menu is displayed:
<Insert>
<Modify>
<Cancel><Exit>
<REP-TP><TP-REP>
Insertion of a name
Select <Insert>. The following message is displayed:
_
Code:0000
Lock rel.:00000000
Enter the Name, on a maximum of 2 lines of 16
characters each for a total of 32 characters and
press.↵. Enter the call code (between '1' and '9999')
and the lock release code associated to the name
(numeric only, between 1 and 99999999). When the
specific prompt is displayed, confirm.
Continue in this way inserting all the names. At this
point, press the <Esc> key to return to the Name
Management.menu.
Cancel/modify a name
Selecting <Cancel> or <Modify> from the name
Management menu, the following prompt is
displayed:
Select the
name with the
← and → keys
Scroll the names until that to be deleted/modified
is shown. WARNING: during scrolling, only the
first 16 characters of each name are displayed.
When the name concerned has been found, stop
without pressing any key; after approx. 3 seconds,
3
the remaining 16 characters of the name and the
other parameters associated with these will be
displayed.
To delete, press ↵ and confirm. To modify, make
the changes required then press ↵ and confirm.
NOTE: When a name is deleted, any associated
lock release code is automatically deleted
together with the name.
MANAGEMENT VIA KEYBOARD
This type of programming can be used as an
alternative method to that described above only
for minor operations such as for example insertion,
modification or deletion of a single name.
Enter '00' followed by the 4-digit password (for
programming of the names and lock release code)
and by the 'Call' key. If the password is incorrect, an
error message will be output (for further details see
the paragraph on insertion of lock release codes
using the keyboard). Once the correct password
has been inserted, the display will show:
<Names>
<Lock release><Esc>
Select <Names> and press 'Call'. The Name
Management menu will be displayed from which to
access all the functions:
<ADD> <CAN>
<MODIFY> <ESC>
Insertion of a name
Selecting <ADD>, the following is displayed:
<Esc><Del><End>A
Use the ↑.and.↓ keys to scroll the characters that
can be entered.
Press the 'Call' key to enter the character selected
in the upper line of the display; starting from the
16th character of the name, the upper line will be
gradually shifted to the left, It is possible to insert up
to 32 characters.
Once entry has been completed, position the cursor
in the reduced <Esc><Del><End> menu. To do this,
hold down the ↓ key until the cursor is positioned on
the 'E' of <Esc>. To confirm insertion of the name,
select the <End> item using the ↑ key and press
DS1038-030
Publicidad
