Setting Parameters (Set Button) - Erreka NAOS NASR70E Manual Del Instalador

Accionador de techo
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

STARTING UP AND PROGRAMMING
3

SETTING PARAMETERS (SET BUTTON)

Programming is only accessible with the door
stopped. It is not accessible with the door opening,
closing or timed to close.
During programming, the operator does not start
any operation.
Step 1 (menu 1): door open position (opening stopper)
54
Installation guide
In general, the programming procedure is as follows:
1 To enter programming mode, hold down the SET
button
until
programming menu number 1 (step 1).
2 Use the |+ and |- buttons to scroll through the
different menus to the one to be modified.
3 Once the required menu is reached, press the SET
button to access the different menu options.
4 In most menus the |+ and |- buttons select the
required option for this menu. Press SET to confirm
once selected, returning to the main menu.
5 As of menu number 4 (step 4), programming can be
finished in advance by holding SET down until
CLappears, without the need to continue advancing
using the |+ button.
6 The display will show CL at the end of
programming.
Each menu is explained in detail below.
M278P0
1 With the display showing rS, enter programming
mode by holding SET down until 1 appears,
indicating programming menu number 1 (step 1).
2 Press SET once: number 1 will start flashing on the
display.
3 Open the door to the opening stopper by pressing
the |+ button. Adjust position using the |+ and |-
buttons.
When programming door open position, IT IS
ESSENTIAL TO OPEN THE DOOR UNTIL THE
CARRIAGE IS SLIGHTLY TOUCHING THE TRACK-
GUIDE'S OPENING STOPPER. If this is not the
case, the operation would not be programmed
correctly.
4 Press SET to programme door open position.
Number 1 will stop flashing on the display,
indicating that it has been programmed.
5 Press the |+ button once to access the next
programming step.
M278P1
1
digit
appears,
indicating

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Naos nasr100eNaos nasr70emNaos nasr100em

Tabla de contenido