Adler europe AD 3066 Manual De Uso página 4

14.In order to provide additional protection, it is recommended to install residue current
device (RCD) in the power circuit, with residual current rating not more than 30 mA.
Contact professional electrician in this matter.
15. Accessible surface temperatures can be high when the appliance is operating.
Never touch the hot surfaces of the appliance.
16. Due to the high temperature you should be careful when removing the prepared
dishes, removing hot grease or other hot liquids. Be careful, there can be hot steam
presence during use of the appliance.
17. This electrical appliance contains a heating function. Surfaces, also different than
the functional surfaces, can develop high temperatures. The equipment shall be touch
only at intended handles and gripping surfaces, and use heat protection like gloves or
similar.
During or after use, please do not touch the baking tray or the hot area on the shell
before the temperature goes down.
18. The device must cool down before you store it.
19. Do not place products made of cardboard, paper, plastic materials or other
flammable or meltable objects in the device.
20. The device is not designed to work with external schedulers or separate remote
control system.
21.Do not insert food portions that use whole oven volume, as it may cause fire and
destruction of the device.
22.The power cord may not be placed above the device and it may not touch or be
located near hot surfaces. Do not place the device under a mains socket.
23. Do not carry the device during operation. After the operation, it can be moved only if
it had enough time for cooling down.
24.Open device by holding the handle (5). Before that, release the buckle (3).
25. Before and during use, make sure that the power cord is not stretched over an open
flame or other heat source or sharp edges that may damage the insulation of the cable.
26. Before first use, remove all packaging components. Attention! In the case of a
casing with metal parts, on these elements a slightly visible protective foil can be
stretched, which should also be removed.
27. NEVER cover the device during operation or when it does not cool down completely,
remember that the heating elements of the device take time to cool down completely.
28. SAVE CAREFULLY if you use the device on surfaces sensitive to high
temperatures. It is recommended then to use insulating washers
29. The device can not be used with external time switches or other separate remote
control systems.
DEVICE DESCRIPTION
1. cover
2. power / thermostat indicator light
3. closing clip
4. heating plates, 4a): upper 4b): lower
5. handle
4