EINHELL GE-CT 18/260 Li Manual De Instrucciones Original página 19

must be obeyed to ensure that the equipment is
used properly.
Important! This equipment must not be used
for composting purposes (shredding) as this
could result in injury or damage to property.
The equipment may be used only for the tasks it
is designed to handle. Any other use is deemed
to be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
4. Technical data
Operating voltage: .................................. 18 V DC
Speed n .............................................8000 min
0
Cutting circle .......................................... Ø 26 cm
Cutting line ...........................................Ø 1.6 mm
Protection class .................................................III
Vibration .............................................. ≤ 2.5 m/s
Uncertainty K ..........................................1.5 m/s
Weight .......................................................2.2 kg
Caution!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries of the Power X-
Change series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with the
Power X charger.
Sound pressure level L
Uncertainty K : ....................................... 2,41 dB
pA
Sound power level L
WA
Uncertainty K : ..................................... 2,41 dB
WA
Guaranteed sound power level L
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Anl_GE_CT_18_260_Li_SPK13.indb 19 Anl_GE_CT_18_260_Li_SPK13.indb 19
-1
2
2
: .................... 70,5 dB(A)
pA
: ....................... 90,5 dB(A)
: ....... 95 dB(A)
WA
GB
The machine noise might exceed 85 dB(A). The
operator will require noise protection measures if
this is the case. The noise was measured in ac-
cordance with EN ISO 11201: 2010 and EN ISO
3744: 2010. The vibration emission level at the
handle was determined in compliance with EN
28662-1: 1992.
The value quoted for vibration was determined in
accordance with a set of standardized criteria and
can be used to compare diff erent products with
one another. This value is also suitable to be used
for estimating in advance the strain on the user
caused by the vibration.
Caution!
Depending on how you use the device, the actual
vibration emissions can vary from the values lis-
ted above. Take appropriate measures to protect
yourself against vibration stress. Take the entire
work sequence into consideration including times
at which the device is not working under load or
is switched off . Appropriate measures include
among other things regular care and maintenance
of the device and tool attachments, keeping your
hands warm, taking regular breaks and good
work sequence planning.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect condi-
tion.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
•
Wear ear protection.
Caution!
Residual risks
Even if you use this electric tool in ac-
cordance with the instructions, certain
residual risks cannot be eliminated. The fol-
lowing hazards may arise in connection with
the equipment's construction and layout:
1. Damage to hearing if no suitable ear protec-
tion is worn.
2. Health damage caused by hand-arm vibra-
tions if the equipment is used over a longer
period or is not properly guided and maintai-
ned.
3. Injury and damage to property caused by fl y-
ing parts.
- 19 -
20.07.2023 09:58:23 20.07.2023 09:58:23