Be Cool SPACE Instrucciones página 17

EN
WARNINGS
To protect your child, please read these instructions
carefully.
The car seat is suitable for children from 40 to 150 cm.
This car seat is only suitable for use in vehicles fitted
with retractable 3-point seat belts and approved
under standard GB 27887 or ECE R 16.
Read the instructions carefully to avoid making any
mistakes.
Use the harness for children with a height of between
40 and 105 cm.
The 3-point seat belt or harness are optional for
children between 100 and 105 cm.
Check that all the vehicle belts and harness straps are
tight and are not twisted before use.
Check that the seat belt fits snugly to prevent the child
from falling out; the child's pelvis must be held firmly
in particular.
32
Replace the child safety seat after an accident.
For safety reasons, do not make any modifications to
the car safety seat.
Avoid exposing the seat to direct sunlight if it is not
protected by the cover, as this may cause burns to the
child's skin.
Never leave the child unattended in the safety seat.
All luggage and any other objects that could cause
injury in the event of an accident should be securely
fastened.
The car safety seat should not be used without the
cover.
The car safety seat is suitable for children under 150
cm in height.
It can be used in the forward facing position before
the child reaches 105 cm in height, provided that the
harness is used, but it must not be installed on a seat
equipped with an airbag. Once the child has reached
15 months, the car seat should be installed on the rear
seats of the vehicle and in the forward facing position.
Keep the instruction manual for future reference.
Only use the safety seat in the car, not at home.
Securely fasten the car safety seat, even when the
child is not in it.
Check that all the parts of the safety seat are in the
correct position so that they do not get caught in the
doors or moving parts of the vehicle seats.
Take the child out of the seat before making any
adjustments.
Never use a second-hand car seat.
Choose the correct load support point described in
the manual, or you may be at risk.
Choose the correct ISOFIX anchor point.
EN
33