Be Cool SPACE Instrucciones página 18

EN
1_ INSTALLATION OF STATURE RANGE 76_105cm
ISOFIX + top tether + harness ( forward installation )
1. Connect the isofix guider with fixture.
2. Release the isofix of two sides to longest.
3. Holding the baby car seat and connect the isofix with the fixture.
4. It means locked hear click.
5. Make sure the indicator turns green and the two isofix at same
gear No.
If the indicator not green, you have to restart of the connect.
INSTALLATION OF ISOFIX+TOP TETHER+HARNESS
6. Push the baby car seat next to backrest of the car seat tightly.
7. Pull the baby car seat to make sure the isofix locked.
8. Press the button and release the belt of top tether.
9. Connect the tether hook securely to the anchorage fitting.
10. Make sure the colors of the indicators on the tether strap adjuster
should be completely green.
If the indicator is red, please re-install
34 11. Make sure the baby car seat are installed firmly.
12. Press the harness adjustment button.
13. Pull completely the shoulder harnesses of child restraint.
14. Press the red button to disengage the buckle.
15. Put the harness to two sides.
16. Adjust the ring to proper height.
17. Engage the buckle.
18. Pull down the adjustment webbing and adjust it to the proper
length to make sure your child is snugly secured.
19. Make sure the space between the child and the shoulder harness is
about the thickness of one hand.
1.2_ HIDE THE HARNESS
1. Press the red button to disengage the buckle.
2. Lift up the back pad which is below of headrest.
3. Press central strap adjuster and length five-point belt.
4. Open the button on back pad.
5. Hide shoulder pad, strap behind of back pad.
6. Hide the buckle.
2_ INSTALLATION OF I-SIZE BOOSTER SEAT
( 100-150cm
Three point car seat belts ( forward installation )
1. Hide the harness and take away the seat pad, and release the isofix.
2. Let the baby sit on the Child restriant.
3. Adjust proper height of the headrest.
A. Proper height is the safest.
100-150CM, THREE POINT CAR SEAT BELTS
4. Let the car belt through the lap belt guiding.
5. Let the car belt through the lock off device.
6. Tighten the belt after hear the click, Do not twist the belt.
2.1_ ( 100-150cm ), ISOFIX ATTACHMENTS + THREE
POINT CAR SEAT BELTS
Isofix attachments + three point car seat belts ( forward installation )
1. Connect the isofix guiding.
2. Release the isofix of two sides to longest.
3. Holding the baby car seat and connect the isofix with the fixture.
4. It means locked when hear click.
5. Make sure the indicator turns green, and the two isofix at same
gear No. If the indicator not green, you have to restart of the
connect.
6. Push the baby car seat next to backrest of the car seat tightly.
7. Pull the baby car seat to make sure the isofix locked.
8. Hide the harness and take apart the pad.
9. Adjust the ring to proper height.
A. Proper height is the safest.
10. Let the car belt through the lap belt guiding.
11. Let the car belt through the lock off devide.
12. Tighten the belt after hear the click, de not twist the belt.
3_ ADJUST THE RECLINE POSITION
1. Find the recline adjustment handle.
2. Press the recline adjustment handle.
3. There are five recline position.
3.1_ 76-105cm, GEAR 1 TO GEAR 5 CAN BE ADJUSTABLE
3.1_ 100-150cm, , GEAR 1 IS SUITABLE
EN
35