KTM A49012955044 Instrucciones De Montaje página 77

ASSEMBLY OF SHOCK ABSORBER (KTM MOTORCYCLE MODELS) 7
–
dm
Mount piston .
–
Mount rebound shim stack
–
Mount and tighten support
Guideline
Piston rod holder
–
Mount compression shim stack
–
cs
Mount piston .
–
cr
Mount and tighten nut
Guideline
Piston rod nut
Final steps
–
Assemble the damper (see repair manual).
–
Bleed and fill the damper (see repair manual).
–
Fill the damper with nitrogen (see repair manual).
–
Install the spring (see repair manual).
–
Adjust the spring preload of the shock absorber (see repair manual).
–
Install the shock absorber (see Owner's Manual/repair manual).
–
Install the main silencer (see Owner's/repair manual).
–
Install the frame protector (see Owner's Manual/repair manual).
–
Mount the seat (see owner's manual/repair manual).
–
Take the motorcycle off the lift stand (see Owner's Manual/repair manual).
dl
with the smaller washers facing upward.
dk
.
M12x1
ct
with the smaller washers facing downward.
.
M10x1
40 Nm (29.5 lbf ft)
25 Nm (18.4 lbf ft)
Loctite ® 2701™
35