Prusa Research MMU3 Manual Del Usuario página 150

PASO 9 Calibración del eje Z y de la primera capa (opcional)
IMPORTANT: This step is necessary for the MK3S+ if you worked on the extruder
head previously. If you only upgraded the old chimney to the new one, you can skip
to the next step and use the Live Adjust Z function as usual to fine-tune the first
layer.
Go to LCD Menu - Calibration - Calibrate Z.
A continuación, ejecuta la
PASO 10 Running a test print
As a first print please print the Sheep, which is pre-sliced and tested. In case of
any issues, it will make troubleshooting much easier.
MK3S+ MMU3 is reverse-compatible with the MK3S+ MMU2S G-codes.
Visit our PrusaPrinters.org profile
Or go to the folder Prusa3D/Sample objects/MMU3 via the link on your desktop.
The link installs together with a full installation of the PrusaSlicer.
carga el código G PLA_Sheep_200um en la tarjeta SD e inserta la tarjeta en su
impresora.
150
11. Primer comienzo
Calibración de la primera
to download a pre-sliced G-code.
Ensamblaje Original Prusa MMU3
capa.